Mishiinka Toosinta iyo Goynta Siliga
GT2-3.5H
GT3-6H
GT3-8H
GT6-12H
● otomaatig buuxa ah
● xakamaynta CNC
● Noocyo kala duwan oo mashiinno ah oo ku habboon dhexroorka fiilooyinka kala duwan;
● Xawaaraha shaqada oo sarreeya, wuxuu noqon karaa 130M/min.
Mashiinka toosinta iyo goynta siligayagu waxa nashqadeeyay injineerkayagu wuxuuna leeyahay xawaare sare.Waxaan bixin karnaa noocyo kala duwan oo ah hagaajinta fiilada iyo mashiinka goynta kaas oo ku habboon dhexroorka fiilada kala duwan iyo dhererka goynta.
Faa'iidooyinka
1. Simens PLC + shaashadda taabashada, qaybaha korantada ee Schneider, oo si deggan u shaqeynaya.
2. Xakamaynta fiilada waxay qabataa qalabka pneumatic, oo dammaanad qaadaya xawaaraha sare.
3. Tuubada toosan oo leh dhinta toosan (YG-8 Alloy steel material) gudaha, shaqaynaysa nolol dheer.
4. Dhererka goynta fiilada waxaa lagu hagaajin karaa garabka soo dhacaya.
Qiyaasta Mashiinka:
| Qaabka | GT2-3.5H | GT2-6+ | GT3-6H | GT3-8H | GT4-12 | GT6-14 | GT6-12H |
| Dhexroorka siliga (mm) | 2-3.5 | 2-6 | 3-6 | 3-8 | 4-12mm usha silig, 4-10mm dhexroor | 6-14mm usha silig, 6-12mm dhexroor | 6-12 |
| Dhererka goynta (mm) | 300-3000 | 100-6000 | 330-6000 | 330-12000 | Max.12000 | Max.12000mm | Max.12000 |
| Cilad goynta (mm) | ±1 | ±1 | ±1 | ±1 | ±5 | ±5mm | ±5 |
| Xawaaraha shaqada (M/min) | 60-80 | 40-60 | 120 | 130 | 45 | 52M/daqiiqo | Ugu badnaan.130 |
| Matoorka toosan (kw) | 4 | 2.2 | 7 | 11 | 11 | 11kw | 37 |
| Matoorka goynta (kw) | ---- | 1.5 | 3 | 3 | 4 | 5.5kw | 7.5 |
Siliga ka dib toosinta iyo goynta waxaa badanaa loo isticmaalaa alxanka mesh xayndaabka ama goobta dhismaha si toos ah
Adeegga iibka-ka dib
| Waxaanu bixin doonaa muuqaalo rakiban oo dhamaystiran oo ku saabsan mishiinka samaynta siliga mandiilada ee concertina
| Bixi qaabka iyo jaantuska korantada ee khadka soo saarista siliga concertina | Bixi tilmaanta rakibidda iyo buug-gacmeedka mashiinka siliga mandiilka oo toos ah | Ka jawaab su'aal kasta online 24 saacadood maalintii oo la hadal injineerada xirfadlayaasha ah | Shaqaale farsamo ayaa dibadda u aaday si ay u rakibaan oo ay u xalliyaan mishiinka cajaladda ee mandiil oo ay tababaraan shaqaalaha |
Dayactirka qalabka
 | A.Dareeraha saliidda si joogto ah ayaa loogu daraa.B.Hubinta isku xirka fiilooyinka korantada bil kasta. |
Shahaado
FAQ:
S: Waa maxay wakhtiga keenista mishiinka?
J: Qiyaastii 30 maalmood kadib markii aad heshay deebaajigaaga.
S: Waa maxay shuruudaha lacag-bixinta?
A: 30% T / T ka hor, 70% T / T ka hor inta aan la rarin, ama L / C, ama lacag caddaan ah iwm.
S: Immisa qof ayaa ku shaqayn doona mishiinka?
J: Hal shaqaale ayaa ku shaqayn kara 1 ama laba mishiin.
S: Intee in le'eg ayaa wakhtiga dammaanadda?
J: Hal sano ayaa laga joogaa markii mishiinka lagu rakibay warshadii iibsada laakiin 18 bilood gudahooda marka loo eego taariikhda B/L.